Load
Load
PRODUCTS
> 제품 > 전체보기
■ Features
* 고체상태 재료 특성화 시스템
* time domain(ramp, pulse, I-V), AC(임피던스, 커패시턴스, dielectric-constant/loss)측정
* 사용 모델 : ModuLab XM MTS, 1260A, 1296A
* 정밀한 Eurotherm 2000 시리즈 온도 컨트롤러를 사용하여 작동 온도를 1200ºC까지 유지
* electric, ionic, semiconducting, electronic 등 당아한 재료 연구 인터페이스(grain boundaries & electrode) 연구
* 129621A / B / C 샘플 홀더 옵션 사용
* PC 소프트웨어로 온도 제어
■ Applications
* 고체, 고체 산화물, 초 이온, 전자-세라믹 재료 개발
* SOFC 연료 전지 및 고체 배터리를 포함한 에너지 응용 분야
* 항공 우주 / 자동차 응용 분야 – 고온 절연체, 브레이크, 터빈 블레이드
■ Specifications
<129620A High Temperature Furnace Specification
>
* High Temperature Furnace Customized Carbolite VST12/300
* Furnace type Vertical, hinged, split tube furnace
for easy access to sample holder
* Temperature range Room temperature to 1200°C
(Contact us for other temperature
ranges)
* Temperature stability
Stability: < 1°C
* Temperature resolution 0.1°C
* Heating elements
Spiral wire coils embedded in
vacuum formed ceramic fibre half
cylinders
* Construction
Heating elements embedded
in ceramic fibre forms
part of
insulation together with fibre board
and blanket.
Outer case stainless steel with mesh
cover for maximum operator safety
* Heated length
300 mm
* Physical setup
Furnace is positioned 550, 650 or
750 mm (from base to middle of
heated zone) using a desk top stand.
ProboStat sample holder height is
adjustable (80 mm) using ‘Lab-Jack’
* Control thermocouple
Selectable between internal furnace
and ProboStat thermocouple
* Main Controller
Eurotherm 2416CG connected to PC
via ModBus RS232 interface
* Overtemperature detection
/ shutdown
Internal furnace mineral insulated
Type N thermocouple hard-wired to
over-temperature safeguard
controlled by a Eurotherm 2132
temperature controller
* Operating voltage
208-240 V or 120 V single phase
* Power
1.5 kW
* Dimensions (h/w/d)
1200 mm x 500 mm x 500 mm
<129621A/B/C Sample Holder Specifications
>
* High Temperature Sample Holder NorECS ProboStat™ base unit brass (-A/B/C)
or stainless steel (-SA/SB/SC)
* Hot zone parts Spring-loaded sample support tubes, alumina
Gas supply tubes, alumina / silica
Electrode connects, Pt and alumina
Thermocouples, S type
* Sample types
129621A - disk only (normal)
129621B - disk & bar (extensive)
129621C - disk only (easy load)
* Sample disk size
20 mm sample diameter recommended
(10-24 mm diameter upon request)
Max diameter 15 mm for ‘129621C’
* Max. size bar sample
25-50 mm long
* Temperature range
Room Temperature to 1200°C depending on
range of furnace
* Temperature accuracy Typically 1°C, depending on thermocouple
life, calibration, and user expertise
* Atmosphere control
Swagelok quick-connects
ingle or dual atmospheres (dual only for
versions ‘A’ and ‘B’)
Gas mixers and other ancilliary equipment
available upon request
<System Compatibility
>
Carbolite 129620A furnace with 129621A/B/C NorECs ProboStat™ sample holder is fully compatible with all Solartron materials test products, including:
*
1260A Impedance Analyzer
* 1296A Dielectric Interface (with 12xx FRA or 1260A)
* ModuLab XM MTS Materials Test System
* Materials Lab XM Materials Test System
* XM-studio software and SMaRT software
제품문의 바로가기
카탈로그
제조사 | 제품명 | 제목 | |
---|---|---|---|
AMETEK Solartron | 129620A High Temperature Testing System |
제조사 : AMETEK Solartron 제품명 : 129620A High Temperature Testing System 129620A 제품 카달로그 |
![]() ![]() |
AMETEK Solartron | 129620A High Temperature Testing System |
제조사 : AMETEK Solartron 제품명 : 129620A High Temperature Testing System 전기화학 종합 카탈로그 |
![]() ![]() |
응용자료
제조사 | 제품명 | 제목 | |
---|---|---|---|
등록된 정보가 없습니다. |
동영상