Load
Load
PRODUCTS
> 제품 > 전체보기
■ Features
* AC amplitude range : - 0 ~ 10.23 V rms
* Sine, square and triangle waveforms
* Frequency range : 1 mHz ~ 20 kHz
* Transfer function accuracy : 1%, 1°
■ Applications
제어 시스템의 전달 기능 분석
* 자동화 테스트 시스템
* 전원 공급 장치 (PSU)
* 항공기 계측 / 시스템 제어
* 공기 역학적 테스트
* 무기 안내 시스템
* 로켓 추진 및 벡터링 기술
<Electrochemistry>
1253A를 1287A potentisostat와 함께 사용하면 전기 화학 셀의 임피던스를 측정 할 수 있습니다.
* 부식 및 억제제 연구
* 연료 전지 테스트 및 배터리 연구
* 박막 및 코팅의 특성
* 전기 분석 시스템
<Materials Science>
1296A 또는 1294A를 사용하면 재료 특성 평가에 사용할 수 있습니다.
* 유전체 재료 테스트 (유전 상수, 유전율, tan-delta, 유전 손실)
* 연료 전지 구성 요소의 특성
* 경화 및 중합 반응 분석
* 반도체, 유기 결정 및 세라믹의 전하 이동
* 생체 임피던스 테스트
■ Specifications
<Generator>
* Waveform Sine
* Frequency range 1 mHz to 20 kHz
* Max resolution 1 in 4000
* Sweep types logarithmic, increasing or decreasing
* Points per Sweep 2 to 9999
* AC Amplitude 10 mV to 10.23 V rms
* AC error ±1% ±10 mV
* Distortion 2%
* DC bias range ±10.22 V
* DC bias resolution 20 mV
* DC error ±1% ±20 mV
* Max Output Hi to Lo (DC bias plus AC) ±15 V
* Output impedance (Hi to Lo) 50 Ω ±10%
* Max Voltage (Lo to Ground) ±15 V
* External stop input Contact closure or TTL logic 0
* Connectors Front: floating, 4 mm
Rear: Single BNC, floating shield
* Maximum current ±300 mA peak
Output is short-circuit protected
<Modulator/Demodulator
>
* Input Differential, single BNC
Impedance, Hi or Lo to Ground 100 kΩ, 100 pF
Maximum input Hi to Ground: ±350 V peak, 250 V rms
Lo to Ground: ±350 V peak
*Common Mode Rejection, up to 100 Hz 50 dB
* Carrier frequency range 48 Hz to 10 kHz
*Phase Shift, carrier input to generator output 48 Hz to 300 Hz: 3 degrees
300 Hz to q kHz: 1 degree
1 kHz to 10 Hz: (1 degree + 0.5 degrees/kHz)
* Additional analysis error when demodulating, 1%, 1 degree
mod frequency = 0.05 carrier frequency
* Analysis quadrature rejection 26 dB
<Analyzer
>
Two, independent autoranging input channels with a common analyzer
* Range Sensitivity Full Scale pk Input Common Mode Rejection
30 mV 1 µV 45 mV 30 V
300 mV 10 µV 5 mV 30 V
30 V 1 µV 5 V 30 V
30 V 1 mV (90 dB) 50 V 30 V
300 V 10 mV 500 V 30 V
* Maximum Input Hi to Ground: ±500 V peak, 300 V rms
Lo to Ground: ±30 V peak
* Coupling DC
* Connectors Front: Differential, 4 mm
Rear: Differential, singel BNC
* Impedance, Hi to Lo (Grounded) 1 MΩ ±2%
* Capacitance Front inputs, Hi to Lo (Grounded): 70 pF
Rear inputs, Hi to Lo (Grounded): 100 pF
* Common Mode Rejection, up to 100 Hz 60 dB
* Integration Time Range 0.1 to 100.000
* Cross channel isolation, < 1 kHz, 1 kΩ 100 dB
across input, Lo grounded
<Synchronizer
>
* Connection Differential, BNC
* Impedance, Hi or Lo to Ground >200 kΩ, <100 pF
* Maximum input Hi to Ground: ±350 V peak, 250 V rms
Lo to Ground: ±30 V
* Trigger Point Zero crossing
* Minimum signal to trigger (< 1 kHz) -0.6 V to +0.1 V
* Maximum time to synchronize 12 Hz: 6 cycles
12 Hz: 500 ms
* Additional analyzer error (stable trigger Gain: 1% ± 0.2%/kHz
signal) transfer function mode Phase: 1° ± 0.2° /kHz
< Data Processing >
* Scaling Division by vector (a + jb, rΘ), division by last result, magnitude, or vector
* History file Maximum size: 400 results
Minimum size: 100 results
* Battery discharge time Typically 1000 hrs
<Program Store
>
* Type Battery backed RAM
Max number of programs: 9
Max number of program steps: 320
* Type Permanent, keyswitched, protected EEPROM
Max number of programs: 6
Max number of program steps: 100
<Plotting
>
* Type Digital, compatible with HPGL graphics language
* Parameters X-axis: a, linear scale; f, linear or logarithmic scale
Y-axis: b, r, r(dB), linear scale; degrees
* Plot size A4 or 8.5" x 11"
<Interfaces
>
* Serial output Suitable for use with printers and keyboards compatible with RS232
and RS423. Selectable baud rate: 110 to 9600
* GPIB Compatible with IEEE488. Fully programmable talker/listener;
switch selectable talker-only mode.
* Max data rate 1000 bytes/s
<Power Requirements
>
* Voltage 90 ot 132 VAC, 198 to 264 VAC
Frequency 48 to 65 Hz
Power 150 VA
<Dimensions
>
* Width 432 mm (17")
* Depth 427 mm (18.5")
* Height 108 mm (4.25")
* Weight 10 kg (22 lbs)
* Operating Temperature Range 0 to 50 ºC (32 to 122 ºF)
제품문의 바로가기
카탈로그
제조사 | 제품명 | 제목 | |
---|---|---|---|
AMETEK Solartron | 1253A Frequency Response Analyzer |
제조사 : AMETEK Solartron 제품명 : 1253A Frequency Response Analyzer 전기화학 종합 카탈로그 |
![]() ![]() |
응용자료
제조사 | 제품명 | 제목 | |
---|---|---|---|
등록된 정보가 없습니다. |
동영상